Board cut planner with saw kerf

Arrange a mixed list of cuts across equal-length boards. See the pieces, saw loss and offcut for each board before buying stock.

Your cutting layout

2 boards in this layout Board 1: 60 + 35 in · saw loss 0.25 in · offcut 0.75 in Board 2: 60 + 35 in · saw loss 0.25 in · offcut 0.75 in
ScopeBid: Estimate & Invoice

Contractor estimates and invoices from saved pricing, on your iPhone.

Turn material costs into an estimate in ScopeBid →
See the iPhone appOfficial ScopeBid App Store preview

How the layout is chosen

Enter usable stock length after trimming the ends. The planner places the longest pieces first and picks the tightest board that fits each piece. This produces a workable layout and can use more boards than the mathematical minimum. Use boards of one width and thickness per run.

Kerf is the material the blade removes. An exact end fit needs no final cut. If the remaining sliver is narrower than the blade, the model counts that sliver as saw loss. For a 96-inch board, 60- and 35-inch cuts with a 0.125-inch kerf leave 0.75 inches.

Will four pieces fit on one board?

48 inches is too short. Four 12-inch pieces already use 48 inches. Even three separating cuts at 1/8 inch need another 3/8 inch of stock.

Save the illustrated exampleWill four pieces fit on one board? 48 inches is too short. Four 12-inch pieces already use 48 inches. Even three separating cuts at 1/8 inch need another 3/8 inch of stock.

Save to Pinterest · Download PNG

Browse all 15 visual guides